3200 USG Stainless Steel DOT Liquid Vacuum Truck

Tank capacity - 3200 U.S. gallons plus 3% outage for expansion

Head material - 5/16” stainless steel 316

Shell material - 1/4” stainless steel 316

Tank diameter - 72” OD

Overall tank length - 16’-6”

Reinforcing - External exposed rings, stainless steel 304

Design pressure (internal) - 25 p.s.i.

Design pressure (external) - 15 p.s.i. (full vacuum)

Hydrostatic test pressure - 37.5 p.s.i.

Maximum allowable working - 25 p.s.i.
pressure

Operating temperature - -20˚F to 200˚F

Overturn protection - Front, centre and rear, three (3) leg support and pads

Pressure relief vent - Betts 4” stainless steel 316, 25 p.s.i. (407 / 412)

Primary shut off - 10” quick opening hatch with 9” stainless steel floatball seating against a neoprene seat, ball and seat inspection and service is external, stainless steel 316

Isolation valve - 3” air operated butterfly valve between primary shut off and secondary shut off, stainless steel 316

Secondary shut off - Heavy duty external moisture trap with 5” stainless steel floatball, seating against a neoprene seat, 2” quick action drain valve and hose, moisture trap capacity 28 gallons, stainless steel 316

Vacuum lines - Continuously grounded, wire reinforced, neoprene vacuum / pressure hose, looped to rear, no disconnecting required when dumping, piping stainless steel

Vacuum pressure gauge - Two (2) 4” glycerine filled, anti shock

Liquid level indicator - External arrow rotary float gauge with 9” stainless steel floatball, teflon packing and teflon seals, stainless steel 316, driverside front shell

Baffle - One (1) half baffle, upper section of tank, welded to reinforcing pads, stainless steel 316

Top manway - One (1) 20” diameter manway with neoprene gasket, design pressure 50 p.s.i., stainless steel 316

Sampling port - 3” quick coupling and pressure relief valve

Spilldam - Around 20” manway with drain hoses, stainless steel 316

Walkway - Anti skid gripstrut material on passenger side

Osha type enclosure - Around gripstrut walkway

Grabrail - Tank top

Ladder - To top manway - anti skid material

Hoist - Front mounted hydraulic hoist, 20 tons capacity
- Heavy duty hinges, grease fittings
- Hoist safety prop, full length subframe

Rear door - Full opening rear door, hydraulic operated, dual
All wetted parts stainless steel 316 cylinders, heavy duty wingbolt closures, door safety prop

Vibrator - Hydraulic, mounted on heavy duty mounting
channel and heavy duty tank mounting pad.
Pressure relief valve and variable speed control.
Hose trays / fenders - Full length Painted Stainless Steel combination hose trays and fenders on each side of tank, stay in down position when tank body is raised, anti sail mudflaps, light protection caps, drain valves in each front hose tray

Toolbox - One (1) 36” x 18” x 18” aluminum

Suction valve - One (1) 4” air operated self closing Betts SS valve complete with coupling and drip cap, stainless steel 316, 4” manual SS valve

Internal riser pipe - 4” with deflector / wear plate, stainless steel 316

Discharge valve - One (1) 6” air operated self closing Betts SS valve complete with coupling and drip cap, stainless steel 316, 6” manual SS valve

Bumper - Heavy duty (407 / 412) for valve and underride protection
- Anti skid steps to rear door locks

Hose hooks - Two (2) on rear head, stainless with rub rails

Placards - Four (4) multi purpose

Fire extinguisher - One (1) dry chemical type for hydro carbons

Anti static ground - One (1) static ground cable, 25’ with clamp

Lights-L.E.D. - Vapour proof lights, all wiring in conduit, “Truck “Lites, 3 lamp rear modules, junction box, 3 in row clearance lights, clearance lights and reflectors

Worklights-L.E.D. - Two (2) spotlights with control switch in cab

Amber beacon - Rear of tank top

Back up alarm - Audible

Vacuum pump - Presvac PV750, 410 CFM, 27” Hg maximum vacuum, 25 psi maximum pressure. Four way valve for vacuum and pressure. Check valve and oil catch muffler, screen cartridge, oil catch muffler with drain valve, SS Kamlock coupling for exhaust hose adaptor

Pump drive - hydraulic - Air engaged heavy duty p.t.o. with hydraulic pump, hydraulic motor coupled to vacuum pump. Hydraulic oil reservoir complete with inlet and outlet filters, oil pressure gauge, level gauge, pressure relief valve, oil flow diffuser
- Valve bank to operate: vacuum pump, hoist and door
Hydraulic oil cooler / heat exchanger

Installation - Complete unit on truck chassis by Presvac

Finish – Polished - Tank polished
- All mild steel sandblasted, two (2) coats of primer, two (2) coats of finish paint, Dupont Centari - acrylic urethane enamel, one (1) colour (customer’s choice)
- Painting on the cab & chassis is not included in this quote