2023 Cusco DOT Coded 3150

BODY
Qty Item Description
1.00 IVC-3150D Cusco Industrial Vac Coded Unit 3150 gallon tank capacity
1. TANK
Qty Item Description
1.00 STD-C1015 Circumferential reinforcement rings with tank support feet.
1.00 STD-C1013 4" internal shut-off with 6" SS float ball and cage assembly with neoprene rubber seat
top front of tank
1.00 STD-C1014 One anti surge mounted on reinforcing pad
1.00 STD-C1016 Front, center, and rear 4" pipe construction overturns with reinforcement pads and
gussets
1.00 STD-C1017 20" diameter located on top of tank
1.00 STD-C1019 Hydraulic full opening rear door assembly with 6 heavy duty wing clamps, neoprene
rubber rear door gasket, double acting hydraulic cylinder and safety brace.
1.1. GAUGES AND INSTRUMENTS
Qty Item Description
1.00 C1018 Stainless Steel construction rotary float gauge with 6” float ball assembly located on
rear door.
Quote # Q-04114-1 | Original Quote Date: 4/21/2023 3:56 PM | Last Modified: 4/27/2023 1:06 PM
Page 1 of 5
Qty Item Description
1.00 STD-C1032 Two Glycerin filled vacuum/pressure gauge (one on secondary and one on rear door).
One hydraulic pressure gauge
1.2. VALVES AND PIPING
Qty Item Description
1.00 STD-C1012 4" SS Girard pressure vent, 25 PSIG setting mounted top of tank
1.00 C1020 4" Betts air operated valve with 4" sand pipe / deflector plate assembly, aluminum
Kamlok fittings mounted on rear head
1.00 C1021 6" Betts air operated valve with aluminum Kamlok fittings mounted on rear head
1.00 STD-C1023 Exterior moisture trap assembly with drain valve, sight glass, steel filter screen
assembly, 4" float ball and cage assembly with neoprene rubber seat
1.00 STD-C1022 4” air operated butterfly valve between primary and secondary shut-off with PTO
interconnect
1.00 STD-C1024 4" muffler / oil trap assembly with drain valve, 12" swing out bottom clean out and 4"
exhaust adapter
1.00 STD-C1025 Single 4" diameter no disconnect piping to allow tank to dump with vacuum system
connected with vacuum pump flush port and wire reinforced rubber hose. System will
be protected by 2” Pressure relief valve set at 15 PSI and 1-1/2” vacuum relief valve
set at 24” Hg
1.3. PUMP AND VACUUM SYSTEM
Qty Item Description
1.00 C1026 Fruitland RCF870 Air cooled vacuum/pressure pump, 501 CFM free air rating, 27"Hg
maximum vacuum
1.4. HYDRAULIC SYSTEM
Qty Item Description
1.00 STD-C1027 Hydraulically driven from PTO mounted on transmission with hydraulic pump and
motor
1.00 STD-C1028 Mounted on hydraulic dump sub-frame with suction strainer, diffuser, fill cap,
hydraulic oil filters and sight glass
Quote # Q-04114-1 | Original Quote Date: 4/21/2023 3:56 PM | Last Modified: 4/27/2023 1:06 PM
Page 2 of 5
Qty Item Description
1.00 STD-C1029 Full length hydraulic dump sub-frame with 20 ton, 3 stage single acting dump
cylinder, rear dump pivot assembly and safety brace
1.00 STD-C1031 3-spool valve body for control of hydraulic dump, rear door and vacuum pump
1.5. TRIM
Qty Item Description
1.00 STD-C1035 Four numbered placards
1.00 STD-C1033 Full-length side boxes for hose storage / fender assembly with anti-sail mudflaps and
rear tire skirt
1.00 STD-C1036 25' static line
1.7. LIGHTING
Qty Item Description
1.00 STD-C1038 DOT lighting with three lamp rear module assembly, clearance lamps, reflectors,
three in a row clearance marker, two rear spotlights and one rear amber strobe
beacon
1.8. MISCELLANEOUS
Qty Item Description
1.00 STD-C1040 The entire tank and body of the vacuum system shall be abrasive blasted and primed
with two (2) coats of polyurethane primer and painted with one (1) coat of single stage
paint. WHITE Tank / Black everything else
1.00 C1042 Dual rear mounted hose hooks
1.9. CHASSIS OPTIONS
Qty Item Description
1.00 STD-C1039 DOT rear bumper for protection of external valves with platform/step assembly and