Kaiser Premier CV100T on a 2023 Kenworth T880 chassis.

- Debris & Water Tank -
Cylindrical designed debris/water body, 1/4" A36 minimum tank thickness
11-yard debris tank
1,800 US gallon water tank
Hydraulic dump door locking system, adjustable
Hydraulic dump door open/close system
7" inspection port with ladder access
Rear dump door safety lock pins for operator safety
Double-acting bulldozer cylinders, 50 ton
2" water fill with bacteria break
3" & 4" water fill ports
6" overhead water fill with anti-slosh valve
Water tank sight glasses (3)
Fixed tank
Sloped debris floor
Dual spray bars
12" inspection/sampling hatch on top of debris tank

- Boom Assembly -
Electric over hydraulic boom
Hydraulically powered up/down, left/right, extend/retract boom
Boom control on wireless remote, manual valve bank at the rear of the machine
6" dig tube
(2) 6" dig tube extensions
340 degrees of boom rotation
Top gun boom, no boom hose assembly required
Digging depths up to 20' without additional pipe

- Water Pump & Wash System-
Water system rating is 20 GPM @ 3,000 PSI
Hydraulic drive Cat Pumps 3560 triplex pump
Variable pressure and flow achieved by electronic-over-hydraulic controls on remote and control panel
Water pump on/off on wireless control
Hose: 1/2" x 75' with operating pressure of 3,000 PSI, rated to 4,500 PSI
(3) 1/2" stainless steel dig wands/extensions @ 6' length
Single, double, and rotating nozzle tips
Air purge water system
Glycol system
700,000 BTU boiler
Powered retract hose reel
Banjo water strainer

- Blower and Vacuum System -
6250 CFM 27" Robuschi RBDV 145 blower
High-flow inlet and outlet silencers
Transfer case with air shift
Transfer case oil cooler circuit (automatic/manual)
Integrated cyclone with 4" drain and washout
8" vacuum breaker/throttle, hydraulically actuated
8" I.D. wire-reinforced rubber/gum suction hose
2-piece air filter (blower)

- Electrical System -
Handheld wireless remote control for boom, water pump control, engine speed, vacuum breaker, dump door, unloading, and E-stop
Control panel located inside heated/insulated van body enclosure
Control panel moisture-resistant/sealed
Passive temperature monitoring with alarm

- Hydraulic System -
Hot shift PTO drive
Water recirculation on the go
Hydrostatic water pump drive
Gear pump for controls and positioning equipment

- Miscellaneous -
Powder-coated fabricated components and tank
Steel hydraulic tank located inside van body with sight glass/thermometer and in-tank hydraulic return filter
LED lights: 3 work lights on rear of truck, 2 mid-body, 2 on end of boom with cord reel
LED lights: stop/turn & reverse
Pull points front and rear
Safety lanyard anchors (8)
Electronic, high-decibel safety backup alarm
Heated/insulated van body enclosure
Steel fenders/storage trays
Backup camera

- Selected Options -
Level 2 heated valve & van body package
Turbo flush
CV Series weight monitoring system

- Chassis Overview -
2023 Kenworth T880
MX13
Allison 4500 RDS
Tandem with pusher
Full chassis specs available upon request